1

The Ipe Clip Hidden Deck Fasteners

The hidden deck fasteners have become the hottest thing to hit the decking market. This product gives a seamless and custom look to any deck. The Ipe Clip brand fastener is the one I recommend for several reasons. They offer several models in 3 colors for wood and composite decking and a quick and easy installation process plus they have 3 times the strength of competing fasteners. This product is made in the USA and has many dealers through out the US and internationally.

The standard is recommended for air-dried wood and composite made with fiberglass-reinforced materials that is up up to three times the strength of the other fasteners. This model as well as the others is available in brown, black and grey to match any of your decking needs. The fasteners work great with decking grooved with a biscuit jointer since the size allows for plenty of tolerance within the cut. The installation steps are quite simplistic. Secure the first deck board to the joist with a 90 degree vertical screw, can install an Ipe Plug if this is an Ipe deck. Place an Ipe Clip fastener into the board groove above the joist, than run a screw at 45 degrees (for hardwoods) or 90 degrees for composite decking. Slide the next deck board over the exposed half of the previously installed fastener. That is it and the process is the same for all models.

The Extreme Ipe Clip brand fasteners are recommended for air dried wood and composite wood as well but include a premium grade stainless steel reinforced insert molded inside the fastener for increased holding power. This makes it nearly unbreakable and provides maximum holding strength in extreme hot and cold climates. This model is recommended for stronger hardwoods such as Ipe, Cumaru, Tigerwood, etc.

The Extreme KD hidden deck fasteners are made out of a pliable material with a hollow leg that compresses as kiln-dried material expands on its width, this model also contains the stainless steel insert. The soft body allows for expansion of the deck boards, while the rigid stainless steel insert maintains maximum holding power to keep the boards held firmly to the joist. This model is suitable for kiln-dried wood and many composite materials. If you are not certain what model to choose from than this is the one for you as it has all the properties available for strength, durability and longevity. The website http://www.ipeclip.com has easy to follow instructions and detailed information as well as contact information for your purchasing needs.

If you are building a new deck, you want it to look nice without screw holes all over the top of the deck plus it won’t snag your feet.

One Response so far.

  1. Leo says:

    wow…i have to say that i was going to build a deck using normal screws…but now that i read this, i am really reconsidering that…

    i’ve done some research into other deck hardware and, from reviews like this one, i really think that using the deck fasteners from ipe clip is the way to go!

    THANKS AGAIN!!!!!!!!!!!!!!

Leave a Reply